Find a Service Center
Alternate Products
- 1.1875" Shaft, 2.375" Base to Center, Contact Seals, Eccentric Collar, Non-Expansion Type
description
- Fafnir RSAO and LSAO type pillow blocks are equipped with GN-KRRB wide inner ring ball bearings, and the LSA series is equipped with GN-KLLB wide inner ring bearings. They are ideally suited for installations where the load is heavy inproportion to the shaft diameter or where considerable shock loads exist. These pillow blocks are prelubricated and ready for immediate use. For wet or extremely dirty conditions, a grease fitting is provided for relubrication if required. All units are supplied with a self-locking collar.
applications
- Fans and blowers
- Food processing
- Conveyors
- Agriculture
| Series | RSAO Series |
| Housing Height | 4 1/4 in |
| Base Width | 2 3/8 in |
| End Type | Open End |
| Length Through Bore | 1.96875 in |
| Bolt Hole Length | 5/8 in |
| Bolt Size | 1/2 in |
| Bolt Hole Spacing | 6 5/8 in |
| Mounted Unit Duty | Heavy-Duty |
| Seal Type | Contact Seals |
| Base Height | 7/8 in |
| Bearing Type | Ball Bearing |
| Locking Device | Eccentric Locking Collar |
| Inch/Metric | Inch |
| Housing Material | Cast Iron |
| Collar No. | SN103K |
| Housing Construction | 1 Piece |
| Bearing Design | Non-Expansion |
| Insert Type | Steel Insert |
| Pillow Block Type | Thru-Bolt |
| Base Length | 8 1/4 in |
| Bolt Hole Width | 1 in |
| Overall Width | 2 3/8 in |
| Collar O.D. | 1 15/16 in |
| Bolt Holes | 2 |
| Housing Width | 3 3/4 in |
| Shaft Dia. | 1.1875 in |
| Lubrication | Relubricatable |
| Bearing Insert | GN103KRRB |
| Weight | 6.602 LB |
| EAN or UPC | 87796058156 |
