Find a Service Center
Alternate Products
- 1.1875" Shaft, 2.375" Base to Center, Labyrinth Seals, Eccentric Collar, Non-Expansion Type
description
- Fafnir RSAO and LSAO type pillow blocks are equipped with GN-KRRB wide inner ring ball bearings, and the LSA series is equipped with GN-KLLB wide inner ring bearings. They are ideally suited for installations where the load is heavy inproportion to the shaft diameter or where considerable shock loads exist. These pillow blocks are prelubricated and ready for immediate use. For wet or extremely dirty conditions, a grease fitting is provided for relubrication if required. All units are supplied with a self-locking collar.
applications
- Agriculture
- Fans and blowers
- Food processing
- Conveyors
| Housing Construction | 1 Piece |
| Overall Width | 2 3/8 in |
| Series | LSAO Series |
| Insert Type | Steel Insert |
| Shaft Dia. | 1.1875 in |
| Bearing Type | Ball Bearing |
| Lubrication | Relubricatable |
| Temperature Range [Max] | 350 °F |
| Bolt Hole Spacing | 6 5/8 in |
| Inch/Metric | Inch |
| Bolt Holes | 2 |
| Bearing Design | Non-Expansion |
| Seal Type | Labyrinth Seals |
| End Type | Open End |
| Bolt Hole Length | 5/8 in |
| Base Length | 8 1/4 in |
| Housing Width | 3 3/4 in |
| Pillow Block Type | Thru-Bolt |
| Collar O.D. | 1 15/16 in |
| Bearing Insert | GN103KRRB |
| Locking Device | Eccentric Locking Collar |
| Base Height | 7/8 in |
| Housing Material | Cast Iron |
| Bolt Hole Width | 1 in |
| Housing Height | 4 1/4 in |
| Mounted Unit Duty | Heavy-Duty |
| Base Width | 2 3/8 in |
| Bolt Size | 1/2 in |
| Length Through Bore | 1.96875 in |
| Weight | 6.69 LB |
| EAN or UPC | 87796109391 |
