Find a Service Center
Alternate Products
- 1.1875" Shaft, 2.375" Base to Center, Labyrinth Seals, Eccentric Collar, Non-Expansion Type
description
- Fafnir RSAO and LSAO type pillow blocks are equipped with GN-KRRB wide inner ring ball bearings, and the LSA series is equipped with GN-KLLB wide inner ring bearings. They are ideally suited for installations where the load is heavy inproportion to the shaft diameter or where considerable shock loads exist. These pillow blocks are prelubricated and ready for immediate use. For wet or extremely dirty conditions, a grease fitting is provided for relubrication if required. All units are supplied with a self-locking collar.
applications
- Agriculture
- Fans and blowers
- Food processing
- Conveyors
| Shaft Dia. | 1.1875 in |
| Housing Construction | 1 Piece |
| Bearing Type | Ball Bearing |
| Base Width | 2 3/8 in |
| End Type | Open End |
| Base Height | 7/8 in |
| Temperature Range [Max] | 350 °F |
| Bolt Size | 1/2 in |
| Bolt Holes | 2 |
| Collar O.D. | 1 15/16 in |
| Inch/Metric | Inch |
| Housing Width | 3 3/4 in |
| Pillow Block Type | Thru-Bolt |
| Bearing Insert | GN103KRRB |
| Housing Material | Cast Iron |
| Bearing Design | Non-Expansion |
| Length Through Bore | 1.96875 in |
| Seal Type | Labyrinth Seals |
| Mounted Unit Duty | Heavy-Duty |
| Bolt Hole Length | 5/8 in |
| Series | LSAO Series |
| Lubrication | Relubricatable |
| Bolt Hole Width | 1 in |
| Locking Device | Eccentric Locking Collar |
| Overall Width | 2 3/8 in |
| Base Length | 8 1/4 in |
| Bolt Hole Spacing | 6 5/8 in |
| Insert Type | Steel Insert |
| Housing Height | 4 1/4 in |
| Weight | 6.69 LB |
| EAN or UPC | 87796109391 |
