Find a Service Center
Alternate Products
- 1.1875" Shaft, 2.375" Base to Center, Contact Seals, Eccentric Collar, Non-Expansion Type
description
- Fafnir RSAO and LSAO type pillow blocks are equipped with GN-KRRB wide inner ring ball bearings, and the LSA series is equipped with GN-KLLB wide inner ring bearings. They are ideally suited for installations where the load is heavy inproportion to the shaft diameter or where considerable shock loads exist. These pillow blocks are prelubricated and ready for immediate use. For wet or extremely dirty conditions, a grease fitting is provided for relubrication if required. All units are supplied with a self-locking collar.
applications
- Fans and blowers
- Food processing
- Conveyors
- Agriculture
| Bolt Hole Length | 5/8 in |
| Bolt Hole Width | 1 in |
| Base Length | 8 1/4 in |
| Locking Device | Eccentric Locking Collar |
| Bearing Insert | GN103KRRB |
| Housing Width | 3 3/4 in |
| Base Width | 2 3/8 in |
| Lubrication | Relubricatable |
| Base Height | 7/8 in |
| End Type | Open End |
| Housing Material | Cast Iron |
| Housing Construction | 1 Piece |
| Bolt Holes | 2 |
| Collar O.D. | 1 15/16 in |
| Shaft Dia. | 1.1875 in |
| Series | RSAO Series |
| Mounted Unit Duty | Heavy-Duty |
| Insert Type | Steel Insert |
| Housing Height | 4 1/4 in |
| Pillow Block Type | Thru-Bolt |
| Bearing Type | Ball Bearing |
| Overall Width | 2 3/8 in |
| Seal Type | Contact Seals |
| Inch/Metric | Inch |
| Bearing Design | Non-Expansion |
| Collar No. | SN103K |
| Bolt Size | 1/2 in |
| Bolt Hole Spacing | 6 5/8 in |
| Length Through Bore | 1.96875 in |
| Weight | 6.602 LB |
| EAN or UPC | 87796058156 |
