Find a Service Center
Alternate Products
- 1.6875" Shaft, 3.125" Base to Center, Contact Seals, Eccentric Collar, Non-Expansion Type
description
- Fafnir RSAO and LSAO type pillow blocks are equipped with GN-KRRB wide inner ring ball bearings, and the LSA series is equipped with GN-KLLB wide inner ring bearings. They are ideally suited for installations where the load is heavy inproportion to the shaft diameter or where considerable shock loads exist. These pillow blocks are prelubricated and ready for immediate use. For wet or extremely dirty conditions, a grease fitting is provided for relubrication if required. All units are supplied with a self-locking collar.
applications
- Agriculture
- Fans and blowers
- Food processing
- Conveyors
| Inch/Metric | Inch |
| Housing Width | 5 in |
| Pillow Block Type | Thru-Bolt |
| Locking Device | Eccentric Locking Collar |
| End Type | Open End |
| Insert Type | Steel Insert |
| Mounted Unit Duty | Heavy-Duty |
| Shaft Dia. | 1.6875 in |
| Lubrication | Relubricatable |
| Housing Construction | 1 Piece |
| Bearing Insert | GN111KRRB |
| Bearing Design | Non-Expansion |
| Series | RSAO Series |
| Bearing Type | Ball Bearing |
| Housing Material | Cast Iron |
| Housing Height | 5 5/8 in |
| Bolt Hole Width | 1 1/8 in |
| Base Height | 1 3/16 in |
| Length Through Bore | 2.3125 in |
| Collar O.D. | 2 3/4 in |
| Bolt Hole Length | 3/4 in |
| Bolt Holes | 2 |
| Overall Width | 3 1/8 in |
| Collar No. | SN111K |
| Bolt Size | 5/8 in |
| Base Length | 11 3/8 in |
| Bolt Hole Spacing | 9 in |
| Seal Type | Contact Seals |
| Base Width | 3 1/8 in |
| Weight | 14.718 LB |
| EAN or UPC | 87796060050 |
