Find a Service Center
Alternate Products
- 1.6875" Shaft, 3.125" Base to Center, Contact Seals, Eccentric Collar, Non-Expansion Type
description
- Fafnir RSAO and LSAO type pillow blocks are equipped with GN-KRRB wide inner ring ball bearings, and the LSA series is equipped with GN-KLLB wide inner ring bearings. They are ideally suited for installations where the load is heavy inproportion to the shaft diameter or where considerable shock loads exist. These pillow blocks are prelubricated and ready for immediate use. For wet or extremely dirty conditions, a grease fitting is provided for relubrication if required. All units are supplied with a self-locking collar.
applications
- Agriculture
- Fans and blowers
- Food processing
- Conveyors
| End Type | Open End |
| Base Height | 1 3/16 in |
| Bolt Hole Spacing | 9 in |
| Housing Height | 5 5/8 in |
| Lubrication | Relubricatable |
| Shaft Dia. | 1.6875 in |
| Locking Device | Eccentric Locking Collar |
| Bolt Hole Length | 3/4 in |
| Bearing Type | Ball Bearing |
| Housing Width | 5 in |
| Bolt Holes | 2 |
| Bolt Hole Width | 1 1/8 in |
| Pillow Block Type | Thru-Bolt |
| Mounted Unit Duty | Heavy-Duty |
| Bearing Insert | GN111KRRB |
| Housing Construction | 1 Piece |
| Series | RSAO Series |
| Length Through Bore | 2.3125 in |
| Base Width | 3 1/8 in |
| Housing Material | Cast Iron |
| Insert Type | Steel Insert |
| Overall Width | 3 1/8 in |
| Collar O.D. | 2 3/4 in |
| Base Length | 11 3/8 in |
| Seal Type | Contact Seals |
| Bearing Design | Non-Expansion |
| Bolt Size | 5/8 in |
| Inch/Metric | Inch |
| Collar No. | SN111K |
| Weight | 14.718 LB |
| EAN or UPC | 87796060050 |
