Find a Service Center
- 1.6875" Shaft, 3.125" Base to Center, Labyrinth Seals, Eccentric Collar, Non-Expansion Type
description
- Fafnir RSAO and LSAO type pillow blocks are equipped with GN-KRRB wide inner ring ball bearings, and the LSA series is equipped with GN-KLLB wide inner ring bearings. They are ideally suited for installations where the load is heavy inproportion to the shaft diameter or where considerable shock loads exist. These pillow blocks are prelubricated and ready for immediate use. For wet or extremely dirty conditions, a grease fitting is provided for relubrication if required. All units are supplied with a self-locking collar.
applications
- Agriculture
- Fans and blowers
- Food processing
- Conveyors
| Insert Type | Steel Insert |
| Shaft Dia. | 1.6875 in |
| Housing Width | 5 in |
| Base Width | 3 1/8 in |
| Bolt Holes | 2 |
| Bearing Design | Non-Expansion |
| Collar O.D. | 2 3/4 in |
| Bearing Type | Ball Bearing |
| Seal Type | Labyrinth Seals |
| Base Length | 11 3/8 in |
| Temperature Range [Max] | 350 °F |
| Length Through Bore | 2.3125 in |
| Overall Width | 3 1/8 in |
| Inch/Metric | Inch |
| Lubrication | Relubricatable |
| Series | LSAO Series |
| Mounted Unit Duty | Heavy-Duty |
| Collar No. | SN111K |
| End Type | Open End |
| Pillow Block Type | Thru-Bolt |
| Bolt Hole Spacing | 9 in |
| Bolt Hole Length | 3/4 in |
| Locking Device | Eccentric Locking Collar |
| Bolt Size | 5/8 in |
| Base Height | 1 3/16 in |
| Bearing Insert | GN111KRRB |
| Housing Height | 5 5/8 in |
| Housing Construction | 1 Piece |
| Bolt Hole Width | 1 1/8 in |
| Housing Material | Cast Iron |
| Weight | 14.86 LB |
| EAN or UPC | 87796059924 |
