These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Center Position
P Blocked, A & B to T
NFPA Size
D03
Voltage & Frequency
12 VDC, Low Power Coil
AC/DC
DC
Solenoid Energization Code
None
Port T Pressure Rating
3000 psi
Function Code
6
Electrical Connector Code
None
Rated Flow [Max]
21 gal/min
Mechanical Options
None
Pilot/Drain
None
Spool Spring Arrangement Code
C
Port Restrictor Plugs
None
Cycle Rate [Max]
N/A
Surge Suppressor/Damper Code
None
Crossover
P Blocked, A or B to T
Solenoid Indicator Lights Code
None
Electrical Connection
DIN 43650
Indicator Lights
No
Surge Suppressor/Damper
None
Design No.
60
EN Code
None
Manual Override Option Code
H
Solenoid
Double
Function
3-Position Spring Centered
Port Restrictor Plug Code
None
Seal Material
Buna-N
Electrical Options
None
Pressure [Max]
5075 psi
Overrides
No Overrides
Operation
Solenoid Operated
Coil Type
DIN 43650
Coil Type Code
U
Pressure Port Check Valve Pressure
N/A
Solenoid Code
GL
Valve Type
High-Performance
Port T Code
7
Spool Indicator Switch Code
None
Actuator Type
Solenoid
Response Type
Standard Response
Housing Code
None
Spool Code
6
Pilot Valve Type
N/A
Reducer Module
N/A
Coil Rating Code
GL
Spool Shift Timing
N/A
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
