These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Operation
Solenoid Operated
Pressure Port Check Valve Pressure
N/A
Manual Override Option Code
H
NFPA Size
D03
Response Type
Standard Response
Solenoid Indicator Lights Code
None
Spool Shift Timing
N/A
Port Restrictor Plugs
None
Coil Type
DIN 43650
Reducer Module
N/A
Spool Spring Arrangement Code
C
Coil Type Code
U
Electrical Connector Code
None
Pressure [Max]
5075 psi
Solenoid Code
GL
Spool Indicator Switch Code
None
Function
3-Position Spring Centered
Port T Code
7
Housing Code
None
Pilot Valve Type
N/A
EN Code
None
Seal Material
Buna-N
Mechanical Options
None
Pilot/Drain
None
Rated Flow [Max]
21 gal/min
Valve Type
High-Performance
Actuator Type
Solenoid
Solenoid Energization Code
None
Cycle Rate [Max]
N/A
Coil Rating Code
GL
Function Code
6
Solenoid
Double
Indicator Lights
No
Port T Pressure Rating
3000 psi
Design No.
60
Crossover
P Blocked, A or B to T
Voltage & Frequency
12 VDC, Low Power Coil
Overrides
No Overrides
Electrical Options
None
Center Position
P Blocked, A & B to T
Surge Suppressor/Damper
None
Surge Suppressor/Damper Code
None
Spool Code
6
Port Restrictor Plug Code
None
AC/DC
DC
Electrical Connection
DIN 43650
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
