These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Center Position
All Ports Open
Response Type
Standard Response
Reducer Module
N/A
Housing Code
J
Spool Indicator Switch Code
None
Design No.
60
Coil Rating Code
B
Solenoid Energization Code
V
Surge Suppressor/Damper Code
None
EN Code
None
Coil Type
Flying Leads, 20 mm Thread Wiring Housing
Pilot/Drain
None
AC/DC
AC
Pressure Port Check Valve Pressure
N/A
Coil Type Code
F
Port T Code
6
Electrical Connection
Wired Terminal Block
Seal Material
Buna-N
Mechanical Options
None
Spool Code
0
Spool Shift Timing
N/A
Operation
Solenoid Operated
Surge Suppressor/Damper
None
NFPA Size
D03
Solenoid Code
B
Solenoid
Single
Cycle Rate [Max]
N/A
Port T Pressure Rating
3000 psi
Actuator Type
Solenoid
Port Restrictor Plugs
None
Spool Spring Arrangement Code
B
Port Restrictor Plug Code
None
Function Code
0
Voltage & Frequency
110/120 VAC – 50/60 Hz
Indicator Lights
Yes
Rated Flow [Max]
21 gal/min
Crossover
All Ports Open
Pressure [Max]
5075 psi
Manual Override Option Code
None
Pilot Valve Type
N/A
Overrides
No Overrides
Electrical Options
None
Solenoid Indicator Lights Code
L
Valve Type
High-Performance
Function
2-Position Spring Offset, End to Center
Electrical Connector Code
T
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back