These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Pressure [Max]
5075 psi
Design No.
60
Electrical Options
None
Spool Indicator Switch Code
None
Spool Spring Arrangement Code
B
NFPA Size
D03
Valve Type
High-Performance
Response Type
Standard Response
EN Code
None
Seal Material
Buna-N
Function Code
0
Function
2-Position Spring Offset, End to Center
Rated Flow [Max]
21 gal/min
Spool Shift Timing
N/A
Electrical Connector Code
T
Crossover
All Ports Open
Solenoid Energization Code
V
Mechanical Options
None
Reducer Module
N/A
Spool Code
0
Solenoid Code
B
Cycle Rate [Max]
N/A
Pilot/Drain
None
Port Restrictor Plug Code
None
Voltage & Frequency
110/120 VAC – 50/60 Hz
Port Restrictor Plugs
None
Solenoid Indicator Lights Code
L
Surge Suppressor/Damper Code
None
Port T Pressure Rating
3000 psi
Electrical Connection
Wired Terminal Block
Overrides
No Overrides
Port T Code
6
AC/DC
AC
Operation
Solenoid Operated
Pressure Port Check Valve Pressure
N/A
Actuator Type
Solenoid
Coil Type
Flying Leads, 20 mm Thread Wiring Housing
Coil Type Code
F
Center Position
All Ports Open
Indicator Lights
Yes
Coil Rating Code
B
Solenoid
Single
Housing Code
J
Pilot Valve Type
N/A
Surge Suppressor/Damper
None
Manual Override Option Code
None
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back