These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Pressure Port Check Valve Pressure
N/A
Electrical Connection
No Connector
Electrical Connector Code
None
Port T Pressure Rating
3000 psi
Mechanical Options
None
Spool Spring Arrangement Code
A
Housing Code
J
Solenoid Indicator Lights Code
None
Spool Shift Timing
N/A
Response Type
Standard Response
Surge Suppressor/Damper Code
None
Valve Type
High-Performance
Indicator Lights
No
Reducer Module
N/A
NFPA Size
D03
Rated Flow [Max]
21 gal/min
Spool Indicator Switch Code
None
Operation
Solenoid Operated
Solenoid
Single
Design No.
60
Spool Code
2
AC/DC
DC
Port Restrictor Plug Code
None
EN Code
None
Pilot Valve Type
N/A
Solenoid Code
H
Surge Suppressor/Damper
None
Actuator Type
Solenoid
Cycle Rate [Max]
N/A
Center Position
All Ports Blocked
Solenoid Energization Code
None
Coil Type Code
F
Electrical Options
None
Manual Override Option Code
H
Coil Type
Flying Leads, 20 mm Thread Wiring Housing
Coil Rating Code
H
Function
2-Position Spring Offset, End to End
Port T Code
7
Port Restrictor Plugs
None
Function Code
2
Overrides
No Overrides
Voltage & Frequency
24 VDC
Seal Material
Buna-N
Pressure [Max]
5075 psi
Pilot/Drain
None
Crossover
All Ports Blocked
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
