These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Indicator Lights
No
Seal Material
Buna-N
Port T Pressure Rating
3000 psi
Surge Suppressor/Damper Code
None
Voltage & Frequency
24 VDC
Pilot Valve Type
N/A
Spool Code
2
Solenoid Indicator Lights Code
None
Valve Type
High-Performance
Coil Type Code
F
Electrical Connector Code
None
Housing Code
J
Mechanical Options
None
NFPA Size
D03
Electrical Connection
No Connector
Solenoid Code
H
Reducer Module
N/A
Function Code
2
Rated Flow [Max]
21 gal/min
Manual Override Option Code
H
Function
2-Position Spring Offset, End to End
Solenoid Energization Code
None
Port Restrictor Plugs
None
Pressure Port Check Valve Pressure
N/A
Spool Indicator Switch Code
None
Spool Spring Arrangement Code
A
Port Restrictor Plug Code
None
Electrical Options
None
Cycle Rate [Max]
N/A
Surge Suppressor/Damper
None
Design No.
60
AC/DC
DC
Overrides
No Overrides
EN Code
None
Port T Code
7
Pilot/Drain
None
Center Position
All Ports Blocked
Pressure [Max]
5075 psi
Operation
Solenoid Operated
Response Type
Standard Response
Coil Rating Code
H
Solenoid
Single
Coil Type
Flying Leads, 20 mm Thread Wiring Housing
Spool Shift Timing
N/A
Actuator Type
Solenoid
Crossover
All Ports Blocked
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
