These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Solenoid
Single
Seal Material
Buna-N
Port Restrictor Plugs
None
AC/DC
DC
Solenoid Energization Code
None
Valve Type
High-Performance
Cycle Rate [Max]
N/A
Design No.
60
Spool Code
2
Port Restrictor Plug Code
None
Rated Flow [Max]
21 gal/min
Electrical Connection
Connector Fitted
NFPA Size
D03
Response Type
Standard Response
Spool Shift Timing
N/A
Surge Suppressor/Damper Code
None
Coil Type
Connector Fitted
Mechanical Options
None
Port T Pressure Rating
3000 psi
Operation
Solenoid Operated
Electrical Connector Code
None
Actuator Type
Solenoid
Function
2-Position Spring Offset, End to End
Electrical Options
None
Spool Spring Arrangement Code
A
Crossover
All Ports Blocked
Voltage & Frequency
24 VDC
Pressure [Max]
5075 psi
Manual Override Option Code
None
Coil Type Code
U1
EN Code
None
Overrides
No Overrides
Function Code
2
Coil Rating Code
H
Port T Code
7
Housing Code
None
Spool Indicator Switch Code
None
Solenoid Indicator Lights Code
None
Pressure Port Check Valve Pressure
N/A
Pilot/Drain
None
Surge Suppressor/Damper
None
Indicator Lights
No
Center Position
All Ports Blocked
Reducer Module
N/A
Solenoid Code
H
Pilot Valve Type
N/A
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
