These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Seal Material
Buna-N
Electrical Connection
Connector Fitted
EN Code
None
Spool Spring Arrangement Code
A
Pilot Valve Type
N/A
Housing Code
None
Design No.
60
Spool Indicator Switch Code
None
Rated Flow [Max]
21 gal/min
Surge Suppressor/Damper
None
Coil Rating Code
H
Mechanical Options
None
Crossover
All Ports Blocked
Response Type
Standard Response
Port Restrictor Plugs
None
Solenoid Code
H
AC/DC
DC
Overrides
No Overrides
Solenoid
Single
Port Restrictor Plug Code
None
Voltage & Frequency
24 VDC
Cycle Rate [Max]
N/A
Coil Type Code
U1
Port T Pressure Rating
3000 psi
Solenoid Energization Code
None
Function Code
2
Operation
Solenoid Operated
Function
2-Position Spring Offset, End to End
NFPA Size
D03
Port T Code
7
Surge Suppressor/Damper Code
None
Coil Type
Connector Fitted
Electrical Connector Code
None
Pilot/Drain
None
Solenoid Indicator Lights Code
None
Actuator Type
Solenoid
Pressure [Max]
5075 psi
Reducer Module
N/A
Pressure Port Check Valve Pressure
N/A
Spool Shift Timing
N/A
Manual Override Option Code
None
Center Position
All Ports Blocked
Spool Code
2
Valve Type
High-Performance
Indicator Lights
No
Electrical Options
None
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
