These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Actuator Type
Solenoid
Rated Flow [Max]
21 gal/min
Operation
Solenoid Operated
Seal Material
Buna-N
Spool Indicator Switch Code
None
Cycle Rate [Max]
N/A
Electrical Connector Code
None
Center Position
All Ports Blocked
Solenoid Code
B
Solenoid Indicator Lights Code
None
Reducer Module
N/A
Port Restrictor Plugs
None
Indicator Lights
No
Function
2-Position Spring Offset, End to End
Pressure Port Check Valve Pressure
N/A
Solenoid
Single
Mechanical Options
None
Housing Code
None
Port Restrictor Plug Code
None
EN Code
None
Spool Spring Arrangement Code
A
Pilot Valve Type
N/A
Valve Type
High-Performance
Response Type
Standard Response
Voltage & Frequency
110/120 VAC – 50/60 Hz
Spool Code
2
Solenoid Energization Code
None
Electrical Options
None
Manual Override Option Code
H
Coil Type
DIN 43650
Surge Suppressor/Damper
None
NFPA Size
D03
Spool Shift Timing
N/A
Coil Type Code
U
Surge Suppressor/Damper Code
None
Pilot/Drain
None
Port T Pressure Rating
3000 psi
Coil Rating Code
B
Electrical Connection
DIN 43650
Overrides
No Overrides
AC/DC
AC
Crossover
All Ports Blocked
Design No.
60
Port T Code
6
Pressure [Max]
5075 psi
Function Code
2
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
