These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Port T Pressure Rating
3000 psi
Voltage & Frequency
110/120 VAC – 50/60 Hz
NFPA Size
D03
Surge Suppressor/Damper Code
None
Electrical Options
None
Mechanical Options
None
Solenoid
Single
Actuator Type
Solenoid
Port T Code
6
Solenoid Code
B
Reducer Module
N/A
Surge Suppressor/Damper
None
Response Type
Standard Response
Spool Shift Timing
N/A
Coil Rating Code
B
AC/DC
AC
Indicator Lights
No
Design No.
60
Operation
Solenoid Operated
Port Restrictor Plug Code
None
Spool Spring Arrangement Code
A
Coil Type
DIN 43650
Rated Flow [Max]
21 gal/min
Pilot/Drain
None
Solenoid Energization Code
None
Pressure Port Check Valve Pressure
N/A
Manual Override Option Code
H
Spool Code
2
Cycle Rate [Max]
N/A
Function Code
2
Valve Type
High-Performance
Function
2-Position Spring Offset, End to End
Crossover
All Ports Blocked
Pressure [Max]
5075 psi
Spool Indicator Switch Code
None
Housing Code
None
Center Position
All Ports Blocked
Coil Type Code
U
Overrides
No Overrides
Electrical Connection
DIN 43650
Port Restrictor Plugs
None
Seal Material
Buna-N
Pilot Valve Type
N/A
EN Code
None
Electrical Connector Code
None
Solenoid Indicator Lights Code
None
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
