These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Electrical Connector Code
None
Function Code
0
Indicator Lights
No
Pilot Valve Type
N/A
Seal Material
Buna-N
Port Restrictor Plug Code
None
Reducer Module
N/A
Coil Rating Code
H
Port T Code
7
Spool Shift Timing
N/A
Response Type
Standard Response
NFPA Size
D03
EN Code
None
AC/DC
DC
Operation
Solenoid Operated
Function
3-Position Spring Centered
Cycle Rate [Max]
N/A
Surge Suppressor/Damper
None
Pressure Port Check Valve Pressure
N/A
Solenoid
Double
Mechanical Options
None
Housing Code
J
Solenoid Energization Code
None
Pilot/Drain
None
Spool Spring Arrangement Code
C
Coil Type
Flying Leads, 20 mm Thread Wiring Housing
Rated Flow [Max]
21 gal/min
Center Position
All Ports Open
Actuator Type
Solenoid
Overrides
No Overrides
Spool Code
0
Voltage & Frequency
24 VDC
Electrical Options
None
Port Restrictor Plugs
None
Pressure [Max]
5075 psi
Crossover
All Ports Open
Manual Override Option Code
None
Spool Indicator Switch Code
None
Port T Pressure Rating
3000 psi
Valve Type
High-Performance
Surge Suppressor/Damper Code
None
Solenoid Code
H
Solenoid Indicator Lights Code
None
Design No.
60
Coil Type Code
F
Electrical Connection
No Connector
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
