These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Solenoid Code
H
Crossover
All Ports Open
EN Code
None
Indicator Lights
No
Electrical Connection
No Connector
Operation
Solenoid Operated
Response Type
Standard Response
Coil Type Code
F
Coil Type
Flying Leads, 20 mm Thread Wiring Housing
Seal Material
Buna-N
Surge Suppressor/Damper
None
Design No.
60
Spool Spring Arrangement Code
C
Mechanical Options
None
Solenoid Energization Code
None
Coil Rating Code
H
Cycle Rate [Max]
N/A
Port Restrictor Plug Code
None
Solenoid
Double
Pilot/Drain
None
Actuator Type
Solenoid
Spool Code
0
Spool Indicator Switch Code
None
Pressure Port Check Valve Pressure
N/A
Port Restrictor Plugs
None
Center Position
All Ports Open
AC/DC
DC
Solenoid Indicator Lights Code
None
Electrical Connector Code
None
Surge Suppressor/Damper Code
None
Voltage & Frequency
24 VDC
NFPA Size
D03
Pilot Valve Type
N/A
Function
3-Position Spring Centered
Overrides
No Overrides
Port T Pressure Rating
3000 psi
Reducer Module
N/A
Rated Flow [Max]
21 gal/min
Spool Shift Timing
N/A
Valve Type
High-Performance
Pressure [Max]
5075 psi
Housing Code
J
Function Code
0
Electrical Options
None
Manual Override Option Code
None
Port T Code
7
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
