These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Solenoid
Single
Spool Shift Timing
N/A
Electrical Connection
DIN 43650
Surge Suppressor/Damper Code
None
Cycle Rate [Max]
N/A
Pressure [Max]
5075 psi
Crossover
All Ports Open
Coil Type
DIN 43650
Actuator Type
Solenoid
Spool Code
0
Spool Indicator Switch Code
None
Spool Spring Arrangement Code
BL
Pilot Valve Type
N/A
Port Restrictor Plugs
None
Indicator Lights
No
Coil Rating Code
B
Solenoid Code
B
Pressure Port Check Valve Pressure
N/A
Rated Flow [Max]
21 gal/min
Port Restrictor Plug Code
None
Solenoid Indicator Lights Code
None
Pilot/Drain
None
Overrides
No Overrides
Voltage & Frequency
110/120 VAC – 50/60 Hz
Design No.
60
Surge Suppressor/Damper
None
Response Type
Standard Response
NFPA Size
D03
Seal Material
Buna-N
AC/DC
AC
Electrical Options
None
Solenoid Energization Code
None
Mechanical Options
None
Valve Type
High-Performance
Center Position
All Ports Open
Port T Pressure Rating
3000 psi
Reducer Module
N/A
Function Code
0
Coil Type Code
U
Operation
Solenoid Operated
EN Code
None
Port T Code
6
Housing Code
None
Function
2-Position Spring Offset, End to Center
Electrical Connector Code
None
Manual Override Option Code
None
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
