These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Port Restrictor Plugs
None
Crossover
All Ports Open
Port T Pressure Rating
3000 psi
Actuator Type
Solenoid
Electrical Connection
DIN 43650
Rated Flow [Max]
21 gal/min
EN Code
None
Coil Type
DIN 43650
Surge Suppressor/Damper Code
None
Voltage & Frequency
110/120 VAC – 50/60 Hz
Electrical Options
None
Port T Code
6
Port Restrictor Plug Code
None
Pressure [Max]
5075 psi
Indicator Lights
No
Mechanical Options
None
Surge Suppressor/Damper
None
Coil Type Code
U
Coil Rating Code
B
Pilot Valve Type
N/A
Function
2-Position Spring Offset, End to Center
Pilot/Drain
None
Cycle Rate [Max]
N/A
Solenoid Energization Code
None
Function Code
0
Valve Type
High-Performance
Reducer Module
N/A
Seal Material
Buna-N
Spool Spring Arrangement Code
BL
Response Type
Standard Response
Center Position
All Ports Open
Solenoid Indicator Lights Code
None
AC/DC
AC
Operation
Solenoid Operated
Manual Override Option Code
None
Spool Code
0
Electrical Connector Code
None
Overrides
No Overrides
Pressure Port Check Valve Pressure
N/A
Spool Indicator Switch Code
None
Spool Shift Timing
N/A
NFPA Size
D03
Housing Code
None
Design No.
60
Solenoid Code
B
Solenoid
Single
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
