These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Indicator Lights
No
Port T Pressure Rating
3000 psi
Rated Flow [Max]
21 gal/min
Pilot/Drain
None
Port Restrictor Plug Code
None
Voltage & Frequency
24 VDC, Low Power Coil
Center Position
All Ports Blocked
Housing Code
None
Reducer Module
N/A
Response Type
Standard Response
Port T Code
7
Electrical Connector Code
None
Electrical Connection
DIN 43650
Coil Type Code
U
Overrides
No Overrides
Spool Indicator Switch Code
None
Solenoid
Single
Spool Shift Timing
N/A
Spool Code
2
Solenoid Code
HL
Electrical Options
None
EN Code
None
Function Code
2
Spool Spring Arrangement Code
A
Actuator Type
Solenoid
Coil Type
DIN 43650
Surge Suppressor/Damper Code
None
Solenoid Energization Code
None
Function
2-Position Spring Offset, End to End
Crossover
All Ports Blocked
Mechanical Options
None
Pressure [Max]
5075 psi
AC/DC
DC
Manual Override Option Code
None
Surge Suppressor/Damper
None
Port Restrictor Plugs
None
Cycle Rate [Max]
N/A
Operation
Solenoid Operated
Seal Material
Buna-N
NFPA Size
D03
Pilot Valve Type
N/A
Coil Rating Code
HL
Pressure Port Check Valve Pressure
N/A
Valve Type
High-Performance
Design No.
60
Solenoid Indicator Lights Code
None
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
