These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Operation
Solenoid Operated
Housing Code
None
EN Code
None
Response Type
Standard Response
Electrical Connector Code
None
Spool Indicator Switch Code
None
Spool Spring Arrangement Code
A
Coil Type Code
U
Valve Type
High-Performance
Reducer Module
N/A
Solenoid Indicator Lights Code
None
Seal Material
Buna-N
Pilot Valve Type
N/A
Port T Code
7
Pressure Port Check Valve Pressure
N/A
Spool Shift Timing
N/A
Solenoid Energization Code
None
NFPA Size
D03
Pressure [Max]
5075 psi
Manual Override Option Code
None
Electrical Connection
DIN 43650
Port Restrictor Plug Code
None
Solenoid Code
HL
Coil Rating Code
HL
Electrical Options
None
Overrides
No Overrides
Actuator Type
Solenoid
Design No.
60
Mechanical Options
None
Port T Pressure Rating
3000 psi
Function Code
2
Surge Suppressor/Damper Code
None
Coil Type
DIN 43650
Voltage & Frequency
24 VDC, Low Power Coil
Rated Flow [Max]
21 gal/min
Spool Code
2
Solenoid
Single
Center Position
All Ports Blocked
AC/DC
DC
Cycle Rate [Max]
N/A
Function
2-Position Spring Offset, End to End
Indicator Lights
No
Port Restrictor Plugs
None
Surge Suppressor/Damper
None
Crossover
All Ports Blocked
Pilot/Drain
None
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
