These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Spool Shift Timing
N/A
Function Code
2
Spool Code
2
EN Code
None
Electrical Options
None
Spool Spring Arrangement Code
C
Solenoid Indicator Lights Code
None
Port T Code
7
Solenoid Energization Code
None
Operation
Solenoid Operated
Pilot/Drain
None
Seal Material
Buna-N
Response Type
Standard Response
Rated Flow [Max]
21 gal/min
Coil Type Code
F
Voltage & Frequency
12 VDC
Spool Indicator Switch Code
None
Housing Code
W
Center Position
All Ports Blocked
Electrical Connector Code
None
Valve Type
High-Performance
Coil Rating Code
G
Port T Pressure Rating
3000 psi
Electrical Connection
No Connector
Reducer Module
N/A
Solenoid Code
G
Surge Suppressor/Damper
None
Pilot Valve Type
N/A
Overrides
No Overrides
Function
3-Position Spring Centered
Surge Suppressor/Damper Code
None
Solenoid
Double
Mechanical Options
None
Manual Override Option Code
None
Port Restrictor Plugs
None
Crossover
All Ports Blocked
AC/DC
DC
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Indicator Lights
No
Cycle Rate [Max]
N/A
Port Restrictor Plug Code
None
NFPA Size
D03
Pressure [Max]
5075 psi
Pressure Port Check Valve Pressure
N/A
Actuator Type
Solenoid
Design No.
60
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
