These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Coil Rating Code
G
Valve Type
High-Performance
Surge Suppressor/Damper
None
Solenoid Code
G
Manual Override Option Code
None
Response Type
Standard Response
Port T Code
7
Port T Pressure Rating
3000 psi
Surge Suppressor/Damper Code
None
Cycle Rate [Max]
N/A
Voltage & Frequency
12 VDC
Spool Code
2
Solenoid Indicator Lights Code
None
Seal Material
Buna-N
Pressure Port Check Valve Pressure
N/A
Indicator Lights
No
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Pilot Valve Type
N/A
Solenoid Energization Code
None
Electrical Options
None
Port Restrictor Plug Code
None
NFPA Size
D03
Crossover
All Ports Blocked
Spool Shift Timing
N/A
Center Position
All Ports Blocked
Pressure [Max]
5075 psi
EN Code
None
Housing Code
W
Spool Spring Arrangement Code
C
Coil Type Code
F
Overrides
No Overrides
AC/DC
DC
Port Restrictor Plugs
None
Electrical Connection
No Connector
Pilot/Drain
None
Spool Indicator Switch Code
None
Electrical Connector Code
None
Operation
Solenoid Operated
Reducer Module
N/A
Solenoid
Double
Mechanical Options
None
Actuator Type
Solenoid
Function Code
2
Design No.
60
Function
3-Position Spring Centered
Rated Flow [Max]
21 gal/min
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
