These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Pressure Port Check Valve Pressure
N/A
Function
3-Position Spring Centered
Pressure [Max]
5075 psi
Surge Suppressor/Damper
None
Function Code
66
Center Position
P Blocked, A & B to T
Actuator Type
Solenoid
Overrides
No Overrides
Voltage & Frequency
110/120 VAC – 50/60 Hz
Electrical Options
None
Pilot Valve Type
N/A
Mechanical Options
None
Rated Flow [Max]
21 gal/min
Coil Type
DIN 43650
Housing Code
None
Spool Spring Arrangement Code
C
Surge Suppressor/Damper Code
None
Reducer Module
N/A
Electrical Connector Code
None
NFPA Size
D03
Indicator Lights
No
Manual Override Option Code
None
Valve Type
High-Performance
Spool Shift Timing
N/A
Spool Indicator Switch Code
None
Solenoid Energization Code
None
Port T Pressure Rating
3000 psi
Spool Code
66
Solenoid
Double
AC/DC
AC
Operation
Solenoid Operated
Port Restrictor Plug Code
None
Electrical Connection
DIN 43650
Coil Rating Code
B
Crossover
P Blocked, A or B to T
Port Restrictor Plugs
None
Solenoid Code
B
Response Type
Standard Response
Pilot/Drain
None
Design No.
60
Coil Type Code
U
Port T Code
6
Seal Material
Buna-N
EN Code
None
Cycle Rate [Max]
N/A
Solenoid Indicator Lights Code
None
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
