These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Reducer Module
N/A
Spool Code
66
Housing Code
None
Center Position
P Blocked, A & B to T
Coil Rating Code
B
Electrical Options
None
Function Code
66
Coil Type Code
U
Design No.
60
Pressure Port Check Valve Pressure
N/A
Spool Spring Arrangement Code
C
Indicator Lights
No
EN Code
None
Solenoid
Double
Surge Suppressor/Damper
None
Solenoid Code
B
Electrical Connection
DIN 43650
Actuator Type
Solenoid
Manual Override Option Code
None
Spool Shift Timing
N/A
Solenoid Indicator Lights Code
None
Valve Type
High-Performance
Pilot Valve Type
N/A
Overrides
No Overrides
Response Type
Standard Response
NFPA Size
D03
Seal Material
Buna-N
Mechanical Options
None
Electrical Connector Code
None
Pressure [Max]
5075 psi
Port Restrictor Plug Code
None
Cycle Rate [Max]
N/A
Port T Code
6
Rated Flow [Max]
21 gal/min
Port T Pressure Rating
3000 psi
Surge Suppressor/Damper Code
None
Pilot/Drain
None
Function
3-Position Spring Centered
Crossover
P Blocked, A or B to T
Coil Type
DIN 43650
Voltage & Frequency
110/120 VAC – 50/60 Hz
Spool Indicator Switch Code
None
AC/DC
AC
Port Restrictor Plugs
None
Solenoid Energization Code
None
Operation
Solenoid Operated
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back