These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Pilot Valve Type
N/A
Seal Material
Buna-N
Pressure [Max]
5075 psi
Manual Override Option Code
None
Port T Code
7
Rated Flow [Max]
21 gal/min
AC/DC
DC
Housing Code
W
Design No.
60
Function
3-Position Detented
Reducer Module
N/A
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Port Restrictor Plugs
None
Solenoid Indicator Lights Code
L
Function Code
2
Coil Type Code
F
Operation
Solenoid Operated
Solenoid Code
H
Surge Suppressor/Damper Code
None
Cycle Rate [Max]
N/A
Mechanical Options
None
Spool Indicator Switch Code
None
NFPA Size
D03
Spool Shift Timing
N/A
Electrical Connection
Wired Terminal Block
Actuator Type
Solenoid
Electrical Connector Code
T
Valve Type
High-Performance
Response Type
Standard Response
Pressure Port Check Valve Pressure
N/A
Surge Suppressor/Damper
None
EN Code
None
Voltage & Frequency
24 VDC
Center Position
All Ports Blocked
Coil Rating Code
H
Solenoid Energization Code
None
Crossover
All Ports Blocked
Spool Code
2
Port T Pressure Rating
3000 psi
Port Restrictor Plug Code
None
Pilot/Drain
None
Electrical Options
None
Solenoid
Double
Overrides
No Overrides
Spool Spring Arrangement Code
N
Indicator Lights
Yes
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
