These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Electrical Connector Code
T
Mechanical Options
None
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Pilot/Drain
None
Solenoid Energization Code
None
Solenoid Indicator Lights Code
L
Valve Type
High-Performance
Solenoid Code
H
Port Restrictor Plug Code
None
Function Code
2
Voltage & Frequency
24 VDC
Spool Shift Timing
N/A
Design No.
60
Manual Override Option Code
None
Operation
Solenoid Operated
Indicator Lights
Yes
Cycle Rate [Max]
N/A
Spool Spring Arrangement Code
N
Solenoid
Double
Pressure [Max]
5075 psi
Function
3-Position Detented
Rated Flow [Max]
21 gal/min
Response Type
Standard Response
Actuator Type
Solenoid
Pressure Port Check Valve Pressure
N/A
Center Position
All Ports Blocked
Housing Code
W
Reducer Module
N/A
Coil Rating Code
H
Surge Suppressor/Damper Code
None
Surge Suppressor/Damper
None
Spool Indicator Switch Code
None
Overrides
No Overrides
Electrical Connection
Wired Terminal Block
Coil Type Code
F
EN Code
None
Seal Material
Buna-N
Electrical Options
None
Crossover
All Ports Blocked
Port T Pressure Rating
3000 psi
Pilot Valve Type
N/A
Port T Code
7
Port Restrictor Plugs
None
AC/DC
DC
NFPA Size
D03
Spool Code
2
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
