These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Coil Type Code
U
Response Type
Standard Response
EN Code
None
Spool Spring Arrangement Code
C
Pilot/Drain
None
Port T Pressure Rating
3000 psi
Solenoid Indicator Lights Code
None
Crossover
All Ports Open
Pressure [Max]
5075 psi
Solenoid
Double
Actuator Type
Solenoid
Valve Type
High-Performance
Spool Code
0
NFPA Size
D03
Overrides
No Overrides
Pressure Port Check Valve Pressure
N/A
Spool Shift Timing
N/A
Mechanical Options
None
Cycle Rate [Max]
N/A
Port Restrictor Plug Code
None
Surge Suppressor/Damper
None
Surge Suppressor/Damper Code
None
Center Position
All Ports Open
Electrical Options
None
Solenoid Energization Code
None
Spool Indicator Switch Code
None
Coil Type
DIN 43650
AC/DC
DC
Coil Rating Code
H
Electrical Connector Code
None
Design No.
60
Port T Code
7
Electrical Connection
DIN 43650
Seal Material
Buna-N
Housing Code
None
Function Code
0
Manual Override Option Code
H
Voltage & Frequency
24 VDC
Solenoid Code
H
Port Restrictor Plugs
None
Reducer Module
N/A
Rated Flow [Max]
21 gal/min
Pilot Valve Type
N/A
Operation
Solenoid Operated
Function
3-Position Spring Centered
Indicator Lights
No
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
