These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Center Position
All Ports Open
Overrides
No Overrides
Electrical Connector Code
None
AC/DC
DC
Surge Suppressor/Damper
None
Design No.
60
Coil Type Code
U
Indicator Lights
No
Port Restrictor Plug Code
None
Valve Type
High-Performance
Port T Pressure Rating
3000 psi
Spool Code
0
Pilot Valve Type
N/A
Actuator Type
Solenoid
Spool Spring Arrangement Code
C
Spool Shift Timing
N/A
Solenoid Energization Code
None
Electrical Connection
DIN 43650
Rated Flow [Max]
21 gal/min
Mechanical Options
None
NFPA Size
D03
Coil Rating Code
H
Solenoid Indicator Lights Code
None
Electrical Options
None
Housing Code
None
Spool Indicator Switch Code
None
Voltage & Frequency
24 VDC
Cycle Rate [Max]
N/A
Function Code
0
Surge Suppressor/Damper Code
None
EN Code
None
Coil Type
DIN 43650
Port Restrictor Plugs
None
Pilot/Drain
None
Solenoid Code
H
Reducer Module
N/A
Manual Override Option Code
H
Port T Code
7
Pressure [Max]
5075 psi
Function
3-Position Spring Centered
Solenoid
Double
Operation
Solenoid Operated
Response Type
Standard Response
Pressure Port Check Valve Pressure
N/A
Seal Material
Buna-N
Crossover
All Ports Open
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
