These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Multi-fluid capability without the need to change seals
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Cycle Rate [Max]
N/A
Mechanical Options
None
Rated Flow [Max]
21 gal/min
Pilot Valve Type
N/A
Coil Rating Code
G
Spool Indicator Switch Code
None
Solenoid Code
G
Indicator Lights
No
Port T Code
7
Solenoid Indicator Lights Code
None
Coil Type
DIN 43650
Electrical Options
None
Seal Material
Buna-N
Port T Pressure Rating
3000 psi
Pressure [Max]
5075 psi
Port Restrictor Plugs
None
Spool Code
6
Design No.
60
Valve Type
High-Performance
Port Restrictor Plug Code
None
Response Type
Standard Response
Function
3-Position Spring Centered
Crossover
P Blocked, A or B to T
Operation
Solenoid Operated
Pressure Port Check Valve Pressure
N/A
Spool Shift Timing
N/A
Coil Type Code
U
Overrides
No Overrides
Surge Suppressor/Damper Code
None
Electrical Connection
DIN 43650
NFPA Size
D03
Solenoid
Double
Actuator Type
Solenoid
AC/DC
DC
EN Code
None
Electrical Connector Code
None
Function Code
6
Spool Spring Arrangement Code
C
Solenoid Energization Code
None
Center Position
P Blocked, A & B to T
Pilot/Drain
None
Housing Code
None
Manual Override Option Code
H
Reducer Module
N/A
Surge Suppressor/Damper
None
Voltage & Frequency
12 VDC
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
