These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Multi-fluid capability without the need to change seals
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Valve Type
High-Performance
Coil Rating Code
G
Coil Type Code
U
Spool Indicator Switch Code
None
Voltage & Frequency
12 VDC
Coil Type
DIN 43650
Spool Shift Timing
N/A
Seal Material
Buna-N
Design No.
60
Overrides
No Overrides
Pilot Valve Type
N/A
Surge Suppressor/Damper
None
Spool Code
6
Actuator Type
Solenoid
Electrical Connector Code
None
Port Restrictor Plug Code
None
Solenoid Code
G
Port Restrictor Plugs
None
Function Code
6
AC/DC
DC
Pressure [Max]
5075 psi
Electrical Options
None
Response Type
Standard Response
Manual Override Option Code
H
Indicator Lights
No
Solenoid
Double
Function
3-Position Spring Centered
Crossover
P Blocked, A or B to T
Pressure Port Check Valve Pressure
N/A
Spool Spring Arrangement Code
C
Electrical Connection
DIN 43650
Pilot/Drain
None
Cycle Rate [Max]
N/A
Center Position
P Blocked, A & B to T
Port T Pressure Rating
3000 psi
Solenoid Energization Code
None
EN Code
None
Port T Code
7
Housing Code
None
Operation
Solenoid Operated
NFPA Size
D03
Rated Flow [Max]
21 gal/min
Solenoid Indicator Lights Code
None
Surge Suppressor/Damper Code
None
Reducer Module
N/A
Mechanical Options
None
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
