These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Crossover
All Ports Blocked
Solenoid Code
H
Coil Rating Code
H
Reducer Module
N/A
Function
2-Position Spring Offset, End to Center
Port Restrictor Plug Code
None
Response Type
Standard Response
Pressure [Max]
5075 psi
Housing Code
None
Solenoid Energization Code
None
Solenoid
Single
Center Position
All Ports Blocked
Port T Pressure Rating
3000 psi
Spool Code
2
EN Code
None
AC/DC
DC
Electrical Connector Code
None
NFPA Size
D03
Pilot Valve Type
N/A
Pressure Port Check Valve Pressure
N/A
Rated Flow [Max]
21 gal/min
Indicator Lights
No
Actuator Type
Solenoid
Spool Indicator Switch Code
None
Voltage & Frequency
24 VDC
Spool Spring Arrangement Code
BL
Electrical Connection
DIN 43650
Coil Type
DIN 43650
Mechanical Options
None
Solenoid Indicator Lights Code
None
Function Code
2
Spool Shift Timing
N/A
Seal Material
Buna-N
Manual Override Option Code
None
Overrides
No Overrides
Surge Suppressor/Damper
None
Electrical Options
None
Port Restrictor Plugs
None
Design No.
60
Surge Suppressor/Damper Code
None
Cycle Rate [Max]
N/A
Coil Type Code
U
Pilot/Drain
None
Port T Code
7
Operation
Solenoid Operated
Valve Type
High-Performance
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
