These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Spool Code
2
Port Restrictor Plug Code
None
Port Restrictor Plugs
None
Function Code
2
EN Code
None
Solenoid Energization Code
None
Design No.
60
Coil Type Code
U
Function
2-Position Spring Offset, End to Center
Actuator Type
Solenoid
Solenoid
Single
Manual Override Option Code
None
AC/DC
DC
Pilot Valve Type
N/A
Solenoid Code
H
Response Type
Standard Response
Solenoid Indicator Lights Code
None
Housing Code
None
Mechanical Options
None
Overrides
No Overrides
Crossover
All Ports Blocked
Surge Suppressor/Damper Code
None
Voltage & Frequency
24 VDC
NFPA Size
D03
Indicator Lights
No
Pressure [Max]
5075 psi
Pressure Port Check Valve Pressure
N/A
Surge Suppressor/Damper
None
Electrical Connector Code
None
Valve Type
High-Performance
Reducer Module
N/A
Center Position
All Ports Blocked
Seal Material
Buna-N
Coil Type
DIN 43650
Spool Indicator Switch Code
None
Rated Flow [Max]
21 gal/min
Cycle Rate [Max]
N/A
Operation
Solenoid Operated
Coil Rating Code
H
Electrical Connection
DIN 43650
Spool Shift Timing
N/A
Spool Spring Arrangement Code
BL
Pilot/Drain
None
Port T Pressure Rating
3000 psi
Electrical Options
None
Port T Code
7
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
