These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Solenoid
Single
Voltage & Frequency
24 VDC
Port T Pressure Rating
3000 psi
Response Type
Standard Response
Port Restrictor Plugs
None
Cycle Rate [Max]
N/A
Valve Type
High-Performance
Spool Code
0
Pressure [Max]
5075 psi
Rated Flow [Max]
21 gal/min
Pressure Port Check Valve Pressure
N/A
Center Position
All Ports Open
AC/DC
DC
Operation
Solenoid Operated
Overrides
No Overrides
Electrical Connection
DIN 43650
Solenoid Indicator Lights Code
None
Pilot Valve Type
N/A
Seal Material
Buna-N
Function Code
0
EN Code
None
Mechanical Options
None
Solenoid Code
H
Surge Suppressor/Damper Code
None
Coil Rating Code
H
Spool Spring Arrangement Code
BL
Pilot/Drain
None
NFPA Size
D03
Design No.
60
Housing Code
None
Port T Code
7
Actuator Type
Solenoid
Solenoid Energization Code
None
Surge Suppressor/Damper
None
Port Restrictor Plug Code
None
Spool Shift Timing
N/A
Reducer Module
N/A
Electrical Connector Code
None
Spool Indicator Switch Code
None
Crossover
All Ports Open
Indicator Lights
No
Function
2-Position Spring Offset, End to Center
Coil Type
DIN 43650
Manual Override Option Code
None
Electrical Options
None
Coil Type Code
U
Weight
1.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
