These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Solenoid Indicator Lights Code
None
EN Code
None
Port Restrictor Plug Code
None
Spool Code
0
Surge Suppressor/Damper
None
Function Code
0
Voltage & Frequency
24 VDC
Port T Pressure Rating
3000 psi
Seal Material
Buna-N
Pressure [Max]
5075 psi
Port Restrictor Plugs
None
Spool Shift Timing
N/A
AC/DC
DC
Reducer Module
N/A
Solenoid Energization Code
None
Pressure Port Check Valve Pressure
N/A
Function
2-Position Spring Offset, End to Center
Coil Rating Code
H
Overrides
No Overrides
Coil Type Code
U
Spool Spring Arrangement Code
BL
Electrical Connection
DIN 43650
Coil Type
DIN 43650
Crossover
All Ports Open
Manual Override Option Code
None
Pilot/Drain
None
Surge Suppressor/Damper Code
None
Operation
Solenoid Operated
Actuator Type
Solenoid
Housing Code
None
Solenoid
Single
Center Position
All Ports Open
Indicator Lights
No
Electrical Options
None
Pilot Valve Type
N/A
Rated Flow [Max]
21 gal/min
Cycle Rate [Max]
N/A
Mechanical Options
None
Response Type
Standard Response
Spool Indicator Switch Code
None
Port T Code
7
Solenoid Code
H
Electrical Connector Code
None
Design No.
60
Valve Type
High-Performance
NFPA Size
D03
Weight
1.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
