These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Rated Flow [Max]
21 gal/min
Spool Spring Arrangement Code
C
Voltage & Frequency
12 VDC
Solenoid
Double
Spool Shift Timing
N/A
Manual Override Option Code
None
Solenoid Code
G
Port Restrictor Plug Code
None
Spool Indicator Switch Code
None
Port T Code
7
Coil Type Code
U
Port Restrictor Plugs
None
Design No.
60
NFPA Size
D03
Crossover
All Ports Open
Housing Code
None
Pilot/Drain
None
Pilot Valve Type
N/A
Cycle Rate [Max]
N/A
Indicator Lights
No
Port T Pressure Rating
3000 psi
Response Type
Standard Response
Electrical Options
None
Valve Type
High-Performance
Solenoid Indicator Lights Code
None
Coil Type
DIN 43650
Surge Suppressor/Damper Code
None
Overrides
No Overrides
Function Code
0
Function
3-Position Spring Centered
Coil Rating Code
G
Surge Suppressor/Damper
None
AC/DC
DC
Electrical Connection
DIN 43650
Electrical Connector Code
None
Reducer Module
N/A
Center Position
All Ports Open
Pressure Port Check Valve Pressure
N/A
Pressure [Max]
5075 psi
Actuator Type
Solenoid
Solenoid Energization Code
None
EN Code
None
Spool Code
0
Mechanical Options
None
Operation
Solenoid Operated
Seal Material
Buna-N
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
