These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Operation
Solenoid Operated
Surge Suppressor/Damper Code
None
Seal Material
Buna-N
Electrical Options
None
Rated Flow [Max]
21 gal/min
Function
3-Position Spring Centered
Pressure Port Check Valve Pressure
N/A
Pressure [Max]
5075 psi
Spool Spring Arrangement Code
C
Valve Type
High-Performance
Solenoid Energization Code
None
Port T Pressure Rating
3000 psi
Solenoid Code
G
Coil Rating Code
G
Port Restrictor Plugs
None
Solenoid Indicator Lights Code
None
Center Position
All Ports Open
Response Type
Standard Response
Port Restrictor Plug Code
None
Port T Code
7
Spool Indicator Switch Code
None
Pilot/Drain
None
Reducer Module
N/A
Function Code
0
EN Code
None
Cycle Rate [Max]
N/A
Coil Type Code
U
Mechanical Options
None
Manual Override Option Code
None
Crossover
All Ports Open
NFPA Size
D03
Electrical Connection
DIN 43650
Housing Code
None
Indicator Lights
No
Actuator Type
Solenoid
Surge Suppressor/Damper
None
Voltage & Frequency
12 VDC
AC/DC
DC
Pilot Valve Type
N/A
Design No.
60
Electrical Connector Code
None
Spool Shift Timing
N/A
Overrides
No Overrides
Solenoid
Double
Coil Type
DIN 43650
Spool Code
0
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
