Find a Service Center
- D05 Single Solenoid Operated Valve
- 12 VDC
- DIN 43650
- DIN 43650
- 2-Position Spring Offset
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Port Restrictor Plugs | None |
| Electrical Connection | DIN 43650 |
| Pilot Valve Type | N/A |
| Actuator Type | Solenoid |
| Design No. | 60 |
| Spool Spring Arrangement Code | A |
| Center Position | All Ports Blocked |
| Pressure [Max] | 3600 psi |
| Mechanical Options | None |
| Response Type | Standard Response |
| Surge Suppressor/Damper | None |
| Electrical Options | None |
| Port T Pressure Rating | 1000 psi |
| Seal Material | Buna-N |
| Mechanical Options Code | None |
| Crossover | All Ports Blocked |
| Valve Type | Standard-Duty |
| Voltage & Frequency | 12 VDC |
| Rated Flow [Max] | 25 gal/min |
| Cycle Rate [Max] | N/A |
| Solenoid | Single |
| NFPA Size | D05 |
| Indicator Lights | No |
| Coil Type | DIN 43650 |
| Electrical Options Code | None |
| Coil Type Code | U |
| Operation | Solenoid Operated |
| Pilot/Drain | None |
| Pressure Port Check Valve Pressure | N/A |
| AC/DC | DC |
| Spool Code | 2 |
| Reducer Module | N/A |
| Flow Direction Code | 4 |
| Coil Rating Code | G |
| Overrides | No Overrides |
| Function | 2-Position Spring Offset |
| Weight | 10.0 LB |
