Find a Service Center
- D05 Single Solenoid Operated Valve
- 12 VDC
- DIN 43650
- DIN 43650
- 2-Position Spring Offset
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Rated Flow [Max] | 25 gal/min |
| Port T Pressure Rating | 1000 psi |
| Spool Spring Arrangement Code | A |
| Function | 2-Position Spring Offset |
| Port Restrictor Plugs | None |
| Pilot Valve Type | N/A |
| Overrides | No Overrides |
| Reducer Module | N/A |
| Response Type | Standard Response |
| Crossover | All Ports Blocked |
| Coil Rating Code | G |
| Electrical Connection | DIN 43650 |
| Center Position | All Ports Blocked |
| Surge Suppressor/Damper | None |
| Coil Type | DIN 43650 |
| Electrical Options | None |
| Voltage & Frequency | 12 VDC |
| NFPA Size | D05 |
| Mechanical Options | None |
| Solenoid | Single |
| Indicator Lights | No |
| Spool Code | 2 |
| Valve Type | Standard-Duty |
| Operation | Solenoid Operated |
| Pressure Port Check Valve Pressure | N/A |
| Mechanical Options Code | None |
| Pressure [Max] | 3600 psi |
| Design No. | 60 |
| Flow Direction Code | 4 |
| Coil Type Code | U |
| Actuator Type | Solenoid |
| Cycle Rate [Max] | N/A |
| Seal Material | Buna-N |
| Electrical Options Code | None |
| Pilot/Drain | None |
| AC/DC | DC |
| Weight | 10.0 LB |
