868850

Vickers SystemStak™ Single Relief Valve

Item #101922965

15 gal/min Flow Rate

+ Show More

Auto Replenish

each One-time purchase

Product Details

Relief valves limit the maximum pressure in a system. These are mainly used to prevent high pressures from damaging system components and provide a path to reservoir. When these valves are used with a pressure-compensated pump, the pressure should be set approximately 10% higher than the pump compensator. Cross port relief valves are mainly used in motor circuits to prevent over pressurization. Sequence valves allow fluid to pass once the inlet pressure to the valve reaches the preset pressure. Pressure-reducing valves only allow pressure to pass up to the preset level. These valves are ideal to reduce the pressure in a particular circuit requiring a lower pressure.

Have all the internal passages necessary to serve the directional valve topping them
Mounting surfaces and port patterns are international standards

Specifications

Design No.	30
Manufacturer Part No.	DGMC-5-PT-AW-S-30
Operating Pressure [Max]	4500 psi
Adjustment Type, Dual	N/A
Relief Function	Single
Actuation Option	Proportional
Fluid Cleanliness	20/18/15 micron
Pressure Adjustment Range, Dual (psi)	N/A
Valve Type	Relief Valve "P" to "T"
Adjustment	Yes
Pressure Limited In, Dual	N/A
Pressure [Max]	4500 psi
Gauge Port Thread Type	SAE
Gage Port	SAE-4
Port Drained Into, Dual	N/A
No. of Stages	Single Stage
Temperature Range [Min]	32 °F
Temperature Range [Max]	176 °F
Compatible Fluids	Petroleum Oil
Remote Control Port	No
External Drain, Dual	N/A
Body Material	Cast Iron
Model No.	DGMC-5-PT-AW-S-30
Valve Mount Type	Subplate/Manifold Mounted
Interface	D05
Performance	Standard Performance
Seal Material	Buna-N
External Drain	No
Leakage	Standard
Port Drained Into	Tank Port
Flow [Max]	32 gal/min
Family Name	Vickers D05 SystemStak™ Valves
Adjustment Type	Screw
Pressure Adjustment Range (psi)	60 to 725
Pressure Limited In	Pressure Port
Weight	6.5 LB