868850

Vickers SystemStak™ Single Relief Valve

Item #101922965

15 gal/min Flow Rate

+ Show More

Auto Replenish

each One-time purchase

Product Details

Relief valves limit the maximum pressure in a system. These are mainly used to prevent high pressures from damaging system components and provide a path to reservoir. When these valves are used with a pressure-compensated pump, the pressure should be set approximately 10% higher than the pump compensator. Cross port relief valves are mainly used in motor circuits to prevent over pressurization. Sequence valves allow fluid to pass once the inlet pressure to the valve reaches the preset pressure. Pressure-reducing valves only allow pressure to pass up to the preset level. These valves are ideal to reduce the pressure in a particular circuit requiring a lower pressure.

Have all the internal passages necessary to serve the directional valve topping them
Mounting surfaces and port patterns are international standards

Specifications

Body Material	Cast Iron
Pressure [Max]	4500 psi
Pressure Limited In	Pressure Port
Adjustment Type	Screw
Valve Mount Type	Subplate/Manifold Mounted
Port Drained Into, Dual	N/A
Relief Function	Single
Adjustment	Yes
Gage Port	SAE-4
Pressure Adjustment Range (psi)	60 to 725
External Drain	No
Pressure Limited In, Dual	N/A
Leakage	Standard
Operating Pressure [Max]	4500 psi
Pressure Adjustment Range, Dual (psi)	N/A
No. of Stages	Single Stage
Flow [Max]	32 gal/min
Valve Type	Relief Valve "P" to "T"
Manufacturer Part No.	DGMC-5-PT-AW-S-30
Actuation Option	Proportional
Model No.	DGMC-5-PT-AW-S-30
Compatible Fluids	Petroleum Oil
Temperature Range [Min]	32 °F
Gauge Port Thread Type	SAE
Interface	D05
Adjustment Type, Dual	N/A
Port Drained Into	Tank Port
External Drain, Dual	N/A
Temperature Range [Max]	176 °F
Design No.	30
Remote Control Port	No
Seal Material	Buna-N
Fluid Cleanliness	20/18/15 micron
Family Name	Vickers D05 SystemStak™ Valves
Performance	Standard Performance
Weight	6.5 LB