These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Actuator Type
Solenoid
Rated Flow [Max]
21 gal/min
Response Type
Standard Response
Crossover
P Blocked, A or B to T
Spool Indicator Switch Code
None
Reducer Module
N/A
Coil Type Code
F
Spool Shift Timing
N/A
Spool Spring Arrangement Code
C
Mechanical Options
None
NFPA Size
D03
Seal Material
Buna-N
Design No.
60
Manual Override Option Code
None
Center Position
P Blocked, A & B to T
Spool Code
6
Electrical Options
None
Valve Type
High-Performance
EN Code
None
Housing Code
J
Solenoid Energization Code
None
Surge Suppressor/Damper Code
None
Electrical Connection
No Connector
Pressure [Max]
5075 psi
Port T Pressure Rating
3000 psi
Operation
Solenoid Operated
Coil Type
Flying Leads, 20 mm Thread Wiring Housing
Coil Rating Code
H
Voltage & Frequency
24 VDC
Port Restrictor Plugs
None
Solenoid Code
H
Solenoid Indicator Lights Code
None
Electrical Connector Code
None
Pressure Port Check Valve Pressure
N/A
Surge Suppressor/Damper
None
Port Restrictor Plug Code
None
Cycle Rate [Max]
N/A
Indicator Lights
No
Pilot/Drain
None
Port T Code
7
Solenoid
Double
Function
3-Position Spring Centered
AC/DC
DC
Pilot Valve Type
N/A
Function Code
6
Overrides
No Overrides
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
