These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Solenoid
Double
Solenoid Indicator Lights Code
None
Spool Indicator Switch Code
None
Surge Suppressor/Damper Code
None
Port Restrictor Plug Code
None
Crossover
P Blocked, A or B to T
Port T Pressure Rating
3000 psi
Coil Rating Code
H
Pilot/Drain
None
Port Restrictor Plugs
None
Operation
Solenoid Operated
Design No.
60
Function Code
6
Mechanical Options
None
AC/DC
DC
Surge Suppressor/Damper
None
Coil Type Code
F
Indicator Lights
No
Coil Type
Flying Leads, 20 mm Thread Wiring Housing
Pressure [Max]
5075 psi
Solenoid Energization Code
None
Housing Code
J
Electrical Options
None
EN Code
None
Electrical Connection
No Connector
Function
3-Position Spring Centered
Pressure Port Check Valve Pressure
N/A
Voltage & Frequency
24 VDC
Valve Type
High-Performance
Port T Code
7
Solenoid Code
H
Center Position
P Blocked, A & B to T
Spool Spring Arrangement Code
C
Manual Override Option Code
None
Reducer Module
N/A
Cycle Rate [Max]
N/A
Spool Code
6
Seal Material
Buna-N
Rated Flow [Max]
21 gal/min
Response Type
Standard Response
Pilot Valve Type
N/A
Electrical Connector Code
None
Overrides
No Overrides
Actuator Type
Solenoid
Spool Shift Timing
N/A
NFPA Size
D03
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
