These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Solenoid
Single
Electrical Connection
DIN 43650
Surge Suppressor/Damper
None
Spool Indicator Switch Code
None
AC/DC
AC
Coil Type
DIN 43650
Solenoid Energization Code
None
Rated Flow [Max]
21 gal/min
Pilot Valve Type
N/A
Spool Shift Timing
N/A
Port Restrictor Plugs
None
Spool Spring Arrangement Code
AL
Port T Code
6
Valve Type
High-Performance
Housing Code
None
Solenoid Code
B
Pilot/Drain
None
Port T Pressure Rating
3000 psi
Spool Code
2
Voltage & Frequency
110/120 VAC – 50/60 Hz
Center Position
All Ports Blocked
Surge Suppressor/Damper Code
None
Function Code
2
Coil Type Code
U
Pressure [Max]
5075 psi
Pressure Port Check Valve Pressure
N/A
EN Code
None
Overrides
No Overrides
Coil Rating Code
B
Design No.
60
Cycle Rate [Max]
N/A
Actuator Type
Solenoid
Electrical Options
None
Electrical Connector Code
None
Port Restrictor Plug Code
None
Indicator Lights
No
NFPA Size
D03
Mechanical Options
None
Crossover
All Ports Blocked
Reducer Module
N/A
Function
2-Position Spring Offset, End to End
Response Type
Standard Response
Solenoid Indicator Lights Code
None
Manual Override Option Code
None
Operation
Solenoid Operated
Seal Material
Buna-N
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
