These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Solenoid
Single
Operation
Solenoid Operated
Pressure Port Check Valve Pressure
N/A
Cycle Rate [Max]
N/A
Solenoid Indicator Lights Code
None
Electrical Connector Code
None
Port Restrictor Plugs
None
Voltage & Frequency
110/120 VAC – 50/60 Hz
Response Type
Standard Response
Coil Type
DIN 43650
Pressure [Max]
5075 psi
Actuator Type
Solenoid
Coil Type Code
U
Surge Suppressor/Damper Code
None
NFPA Size
D03
Pilot/Drain
None
Port T Pressure Rating
3000 psi
Crossover
All Ports Blocked
Pilot Valve Type
N/A
Coil Rating Code
B
Electrical Connection
DIN 43650
Electrical Options
None
Solenoid Energization Code
None
Design No.
60
Spool Code
2
Indicator Lights
No
Center Position
All Ports Blocked
Reducer Module
N/A
Spool Indicator Switch Code
None
Spool Spring Arrangement Code
AL
Valve Type
High-Performance
Surge Suppressor/Damper
None
Manual Override Option Code
None
Solenoid Code
B
Overrides
No Overrides
Port Restrictor Plug Code
None
EN Code
None
AC/DC
AC
Rated Flow [Max]
21 gal/min
Housing Code
None
Function Code
2
Spool Shift Timing
N/A
Mechanical Options
None
Port T Code
6
Function
2-Position Spring Offset, End to End
Seal Material
Buna-N
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
