These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Solenoid Indicator Lights Code
None
Rated Flow [Max]
21 gal/min
Spool Shift Timing
N/A
Electrical Connector Code
None
Solenoid Code
B
Solenoid
Double
Pressure [Max]
5075 psi
Port T Code
6
Operation
Solenoid Operated
Pressure Port Check Valve Pressure
N/A
Coil Type Code
F
Valve Type
High-Performance
Coil Type
Flying Leads, 20 mm Thread Wiring Housing
Center Position
P Blocked, A & B to T
Mechanical Options
None
Function Code
6
Cycle Rate [Max]
N/A
Coil Rating Code
B
Solenoid Energization Code
None
Actuator Type
Solenoid
Seal Material
Buna-N
Design No.
60
Port T Pressure Rating
3000 psi
Crossover
P Blocked, A or B to T
Spool Spring Arrangement Code
C
Spool Indicator Switch Code
None
Electrical Connection
No Connector
Indicator Lights
No
Port Restrictor Plugs
None
Function
3-Position Spring Centered
Pilot Valve Type
N/A
Overrides
No Overrides
Spool Code
6
Port Restrictor Plug Code
None
Electrical Options
None
NFPA Size
D03
Pilot/Drain
None
Reducer Module
N/A
Surge Suppressor/Damper Code
None
Response Type
Standard Response
Housing Code
J
Manual Override Option Code
None
Surge Suppressor/Damper
None
EN Code
None
AC/DC
AC
Voltage & Frequency
110/120 VAC – 50/60 Hz
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back