These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Electrical Connection
No Connector
Solenoid
Double
Overrides
No Overrides
Electrical Options
None
Cycle Rate [Max]
N/A
Spool Shift Timing
N/A
Pressure [Max]
5075 psi
Coil Type Code
F
Manual Override Option Code
None
Housing Code
J
Function Code
6
Design No.
60
Solenoid Indicator Lights Code
None
Pressure Port Check Valve Pressure
N/A
Port T Code
6
Port T Pressure Rating
3000 psi
Coil Type
Flying Leads, 20 mm Thread Wiring Housing
Pilot/Drain
None
Actuator Type
Solenoid
Coil Rating Code
B
Surge Suppressor/Damper
None
Operation
Solenoid Operated
Valve Type
High-Performance
Indicator Lights
No
Spool Spring Arrangement Code
C
Solenoid Code
B
Electrical Connector Code
None
EN Code
None
Center Position
P Blocked, A & B to T
Solenoid Energization Code
None
Port Restrictor Plugs
None
AC/DC
AC
Mechanical Options
None
Crossover
P Blocked, A or B to T
Response Type
Standard Response
Voltage & Frequency
110/120 VAC – 50/60 Hz
NFPA Size
D03
Surge Suppressor/Damper Code
None
Spool Indicator Switch Code
None
Port Restrictor Plug Code
None
Seal Material
Buna-N
Rated Flow [Max]
21 gal/min
Spool Code
6
Function
3-Position Spring Centered
Pilot Valve Type
N/A
Reducer Module
N/A
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back