These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Coil Rating Code
G
Spool Code
2
AC/DC
DC
Rated Flow [Max]
21 gal/min
Valve Type
High-Performance
Port Restrictor Plugs
None
Voltage & Frequency
12 VDC
Coil Type Code
U
Response Type
Standard Response
Solenoid Code
G
EN Code
None
Pressure [Max]
5075 psi
Overrides
No Overrides
Function Code
2
Port T Code
7
Solenoid Indicator Lights Code
None
Spool Indicator Switch Code
None
Function
3-Position Spring Centered
Solenoid Energization Code
None
Electrical Connection
DIN 43650
Pilot/Drain
None
Electrical Connector Code
None
Indicator Lights
No
Seal Material
Buna-N
Reducer Module
N/A
Crossover
All Ports Blocked
Actuator Type
Solenoid
Spool Spring Arrangement Code
C
Solenoid
Double
Design No.
60
Manual Override Option Code
None
Operation
Solenoid Operated
Mechanical Options
None
Surge Suppressor/Damper
None
Housing Code
None
Coil Type
DIN 43650
Center Position
All Ports Blocked
Pressure Port Check Valve Pressure
N/A
Spool Shift Timing
N/A
Port Restrictor Plug Code
None
Electrical Options
None
Surge Suppressor/Damper Code
None
NFPA Size
D03
Pilot Valve Type
N/A
Port T Pressure Rating
3000 psi
Cycle Rate [Max]
N/A
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
